Property
CCDCamera.GuiderReverseX (Boolean)
Syntax
CCDCamera.GuiderReverseX [= Boolean]
Remarks
When using German Equatorial mounts, the autoguider calibration may be reversed for one axis when flipping over the mount. The Reverse X property can be used to switch the direction of the calibration settings in this case. (Note: This is independent of the Pier Flip option on the Guide tab; there is no user interface equivalent to this property.)
If the current guider is the SBIG w/AO-7, then changing the GuiderReverseX property changes the Reverse X Axis property on the AO-7's Drive tab.