ICameraV2GainMin Property |
Namespace: ASCOM.DeviceInterface
Exception | Condition |
---|---|
PropertyNotImplementedException | Must throw an exception if GainMin is not supported |
NotConnectedException | Must throw an exception if the information is not available. (Some drivers may require an active connection in order to retrieve necessary information from the camera.) |
May throw a PropertyNotImplementedException if GainMin is not supported by the camera.
When specifying the gain setting with an integer value, GainMin is used in conjunction with GainMax to specify the range of valid settings.GainMax shall be greater than GainMin. If either is available, then both must be available.
Please see Gain for more information.
It is recommended that this function be called only after a connection is established with the camera hardware, to ensure that the driver is aware of the capabilities of the specific camera model.
This is only available for the Camera Interface Version 2