Optional
Telescope.CommandBlind() Method
Send a string comand directly to the telescope without expecting response data.
Syntax
Telescope.CommandBlind(Command [, Raw])
The method syntax has these parts:
| Part |
Description |
| Command (String) |
The command string to be sent to the telescope. |
| Raw (Boolean) |
Bypass any delimiters or framing around the command (optional, default = False) |
| Return (Nothing) |
Does not return a value. |
Remarks
If the optional Raw parameter is set True, the driver must not insert or append any delimiters; this must send the unmodified raw string directly to the device. If the driver cannot support Raw=True, it must raise an error if Raw is set to True.
If you use this feature of the Telescope driver interface, your application will be dependent on the low-level protocol used by the particular scope you are connected to. Thus your application will not work with any arbitrary type of telescope.
Raises an error if there is a problem communicating with the telescope.
Copyright © 2001-2004, The ASCOM Initiative
