This plug-in driver is available as part of the Obsolete Driver Pack.
For this driver, select SBIG STV on the Setup tab.
The SBIG STV driver is used with an SBIG STV with an installed SBIG CFW5 filter wheel.
When Type is set to RGB + Clear, all four filter positions are valid. The Filter Names should be set as follows:
|
Position |
Filter Name |
|
1 |
Clear |
|
2 |
Red |
|
3 |
Green |
|
4 |
Blue |
When Type is set to Lunar, only the first two positions are valid. Position 1 should be identified as Clear, and Position 2 should be identified as Lunar. The remaining two slots should be left blank, so that they will not be available in the filter selection drop list (if they are not blank and the slot is selected, the lunar filter will be selected)
Focus Offset should be left at 0 for each slot.