Property
CCDCamera.GuideControlVia (GuideViaType)
Syntax
CCDCamera.GuideControlVia [ = GuideViaType]
gvGuiderRelays (0) : Use relays in autoguider
gvMainCameraRelays (1) : Use relays in main camera
gvTelescopePulseGuide (2) : Control mount directly using PulseGuide
gvTelescopeMicroGuide (3) : Control mount directly using "goto" slews
gvASCOMDirect (4) : Use ASCOM PulseGuide independent of Observatory Control
gvLPT378 (5) : No longer supported
gvLPT278 (6) : No longer supported
gvLPT3BC (7) : No longer supported
gvSXSerial (8) : Use Starlight Xpress Autoguider Interface (serial port)
gvMtStromlo (9) : Use Mount Stromlo guider control protocol (serial port)
gvCookbook (10) : Use Cookbook/Astro-Electronic protocol (serial port)
gvLX200Protocol (11) : Use LX200 protocol (serial port)
gvAstroHubDirect (12) : Use Aquest AstroHub
gvShoestring378 (13) : No longer supported
gvShoestring278 (14) : No longer supported
gvShoestring3BC (15) : No longer supported
gvShoestringGPUSB (16) : Use Shoestring USB guider adapter
Remarks
Controls and reports the output method that MaxIm DL uses to apply guide corrections. Note that port selection for those settings that use a serial interface must be performed manually through the Guider Settings user interface.