IDomeV2 Methods

The IDomeV2 type exposes the following members.

Methods
  NameDescription
Public methodAbortSlew
Immediately cancel current dome operation.
Public methodCode exampleAction
Invokes the specified device-specific action.
Public methodCloseShutter
Close shutter or otherwise shield telescope from the sky.
Public methodCommandBlind
Transmits an arbitrary string to the device and does not wait for a response. Optionally, protocol framing characters may be added to the string before transmission.
Public methodCommandBool
Transmits an arbitrary string to the device and waits for a boolean response. Optionally, protocol framing characters may be added to the string before transmission.
Public methodCommandString
Transmits an arbitrary string to the device and waits for a string response. Optionally, protocol framing characters may be added to the string before transmission.
Public methodDispose
Dispose the late-bound interface, if needed. Will release it via COM if it is a COM object, else if native .NET will just dereference it for GC.
Public methodFindHome
Start operation to search for the dome home position.
Public methodOpenShutter
Open shutter or otherwise expose telescope to the sky.
Public methodPark
Rotate dome in azimuth to park position.
Public methodSetPark
Set the current azimuth, altitude position of dome to be the park position.
Public methodSetupDialog
Launches a configuration dialog box for the driver. The call will not return until the user clicks OK or cancel manually.
Public methodSlewToAltitude
Slew the dome to the given altitude position.
Public methodSlewToAzimuth
Slew the dome to the given azimuth position.
Public methodSyncToAzimuth
Synchronize the current position of the dome to the given azimuth.
Top
See Also